講解卷簾門的整體加工過程

　　Explain the overall processing process of rolling shutter doors

　　卷簾門安裝是由開門傳感器提供觸發信號給控制系統，控制系統根據快速卷門的當前位置發出指令給變頻器，啟動驅動電機使門簾快速上升，車輛行人通過后門簾自動下降，關閉通道，直到下一個開門信號再次打開。 卷簾門門升降速度非?？?，不能像鋼制卷閘門一樣直接啟動停止，一般需要變頻器來控制電機的轉速。我們平時在服務程序中，要按時和及時的查驗和保養工作，如此不僅可以節略進門出門的快速故障，可以提高生產效率，而且還可以增加快門的使用時限，降低了生產耗費。保持電機表面應保持公司的員工也說，如果使用時間長了快門，要定期檢查電機，實時更新的潤滑或添加潤滑劑。

　　The installation of rolling shutter doors is triggered by door opening sensors that provide signals to the control system. The control system sends commands to the frequency converter based on the current position of the fast rolling shutter door, starting the drive motor to quickly raise the door curtain. Vehicles and pedestrians automatically descend through the rear door curtain, closing the passage until the next door opening signal opens again. The lifting speed of rolling shutter doors is very fast and cannot be started or stopped directly like steel rolling shutter doors. Generally, a frequency converter is needed to control the motor speed. In our service program, we need to inspect and maintain the work on time and in a timely manner. This not only saves the risk of rapid failures when entering or leaving, improves production efficiency, but also increases the lifespan of the shutter, reducing production costs. The surface of the motor should be maintained. The company's employees also say that if the shutter is used for a long time, the motor should be checked regularly, and lubrication should be updated or added in real time.

　　分為雷達感應控制、地磁感應控制、光電感應控制、拉繩感應控制等開啟方式。它的開關速度是普通鋼質卷簾門的20倍，可以大大增加工廠的生產效率。卷簾門門是集防凍、、密封、便捷、抗撞于一體的金屬工業門，開動速率每秒可以達到2.4米，可以應用于時長次數太多快速通過的貨物運轉倉庫。門板材應用2.0mm厚雙層鋁合金板材復合制成，為聚氨酯發泡制成，每立方容重≥33kg，門板材總厚為40mm。門體頂部側部裝有高性能聚酯密封條，門板結合處有過渡條，多種設計的底部密封條，大大降低了能源的消耗。 操作方便性：采用電動和手動兩種操作方式極其方便。開發的方式可以更好平衡門體重量，提供多種控制系統，以滿足用戶對門的開啟和關閉的要求。

　　It is divided into radar induction control, geomagnetic induction control, photoelectric induction control, rope induction control and other opening methods. Its opening and closing speed is 20 times that of ordinary steel rolling shutter doors, which can greatly increase the production efficiency of factories. The rolling shutter door is an energy-saving metal industrial door that integrates anti freezing, environmental protection, sealing, convenience, and collision resistance. Its operating speed can reach up to 2.4 meters per second, and it can be used in warehouses where goods pass through quickly for too long periods of time. The door panel is made of a composite of 2.0mm thick double-layer aluminum alloy panels, with the center made of polyurethane foam. The density per cubic meter is ≥ 33kg, and the total thickness of the door panel is 40mm. The top side of the door body is equipped with high-performance polyester sealing strips, and there are transition strips at the joint of the door panels. Various designs of bottom sealing strips greatly reduce energy consumption. Convenient operation: It is extremely convenient to use both electric and manual operation methods. The exclusive development method can better balance the weight of the door body and provide multiple control systems to meet users' requirements for opening and closing the door.

　　本文由  濟南卷簾門 友情奉獻.更多有關的知識請點擊  http://www.hirxiwp.cn/   真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Jinan Rolling Shutter Doors For more related knowledge, please click http://www.hirxiwp.cn/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.