Jinan roller shutter door has been quite mature in domestic development, both enterprises and personal garages are widely used, fire prevention, anti-theft and other security measures are also very perfect. The market demand for roller shutter doors is also very large. When many consumers purchase roller shutter doors, they are measured by the manufacturer. After the measurement, they return to the factory for production. This undoubtedly adds a process and wastes a lot of time. Today, I will explain five points of attention for consumers' own measurement: 　

　1. 兩邊呈直角的墻。測量人員應主動征求濟南卷簾門客戶意見，結果:一是客戶選擇左右保留線條，均勻美觀，測量人員可采取減小目標尺寸120mm，即能達到上述目標;二是客戶選擇的目標尺寸是不變的，安裝工人靠墻兩邊的直角線剪小，直到合適為止。 

　　1. Walls at right angles on both sides. The surveyors should take the initiative to ask the opinions of Jinan roller shutter door customers. The results are as follows: first, the customers choose to keep the lines left and right, which are even and beautiful. The surveyors can reduce the target size by 120mm, which can achieve the above goals; second, the target size chosen by the customers is unchanged, and the installers cut the right angle line on both sides of the wall until it is appropriate. 　　2. 上墻的直角。測量時應主動征求濟南卷簾門客戶意見，是客戶選擇保留線條，統一美觀，測量時可采取縮小(短)目標尺寸60mm，即能達到上述目標;二是客戶選擇的目標尺寸是不變的，安裝工人直到切割線合適為止。 

　　2. Right angle to the wall. When measuring, we should take the initiative to ask the customer's opinion of Jinan roller shutter door. First, the customer chooses to keep the line, unified and beautiful. When measuring, we can reduce (short) the target size by 60mm, that is to say, we can achieve the above goal. Second, the target size chosen by the customer is unchanged, and the installation workers will not cut the line until it is appropriate. 

　　地板上。由于顧客的實際情況千差萬別，一般分為三種:一種是已經鋪好了地板，用測量的方法可以測量;第二類不鋪設地板，高度應減小尺寸:A、地磚:大理石、瓷磚統一減小50mm;B、平鋪木地板、復合地板、實木地板統一減少30mm;C、骨架木地板向骨架實際地板厚度增加10mm。

 　　On the floor. As the actual situation of customers varies greatly, they are generally divided into three types: the first one is that the floor has been laid, which can be measured by measuring method; the second one is not laying the floor, and the height should be reduced in size: A. floor tiles: marble and ceramic tiles are reduced by 50mm; B. tiled wood floor, composite floor and solid wood floor are reduced by 30mm; C. the thickness of the skeleton wood floor to the actual skeleton floor is increased by 10 mm. 　

　4. 左右壁面和頂壁面的垂直度和傾斜度。測量者應謹慎選擇zui點作為目標尺寸。 　

　4. Perpendicularity and inclination of left and right wall surfaces and top wall surfaces. The surveyor should carefully select the Zui point as the target size. 　　5. 單一的矩形。測量員應主動征求客戶的意見。結果如下:，顧客選擇保留左右兩邊的線條，統一美觀。只有當調查者和客戶表示目標尺寸減少了60mm，才能實現保留線條的愿望。第二是客戶選擇目標尺寸不變(客戶要求門扇大一點)，一定要向客戶說明用，并依直角墻框邊線裝小裁合適(效果是線左右不對稱)。 　

　5. Single rectangle. The surveyor shall take the initiative to ask for the opinions of the customer. The results are as follows: first of all, customers choose to keep the lines on the left and right sides, unified and beautiful. The desire to retain the line can only be realized when the investigator and the customer say that the target size has been reduced by 60mm. The second is that the customer chooses the target size unchanged (the customer requires the door leaf to be larger), and must explain to the customer for use, and according to the right angle wall frame side line to fit small cuts (the effect is that the line is asymmetric left and right). 　

　以上就是對濟南卷簾門裝置前前期測量對卷簾門裝置的重要性的詳細介紹，想要了解更多請點擊官網 http://www.hirxiwp.cn

　The above is a detailed introduction to the importance of the front and early measurement of Jinan roller shutter device to the roller shutter device. For more information, please click http://www.hirxiwp.cn