在現代家居和商用空間中，卷簾門已成為標配。它不僅提升了空間的性和美觀度，還能有效阻隔灰塵和噪音。根據2025年市場數據，我國卷簾門行業規模已超500億元，電動智能款占比高達70%以上。 然而，許多用戶在使用過程中常常遇到遙控器失靈、控制盒不響應等問題，這往往源于“對碼”操作不當。對碼，即遙控器與控制盒的信號配對，是卷簾門智能控制的核心步驟。操作不當，輕則遙控失效，重則影響門體運行。

　　Rolling shutter doors have become standard in modern home and commercial spaces. It not only enhances the safety and aesthetics of the space, but also effectively blocks dust and noise. According to the latest market data in 2025, the scale of China's rolling shutter door industry has exceeded 50 billion yuan, with electric intelligent models accounting for over 70%. However, many users often encounter problems such as remote control failure and unresponsive control boxes during use, which often stem from improper operation of the code. The pairing of signals between the remote control and the control box is the core step of intelligent control of rolling shutter doors. Improper operation can result in remote control failure or even affect the safe operation of the door.

　　一、卷簾門控制盒對碼基礎知識

　　1、 Basic knowledge of coding for rolling shutter door control box

　　卷簾門控制盒是整個系統的“大腦”，負責接收遙控信號、執行升降指令，并集成限位開關、電機驅動等模塊。常見類型包括壁掛式和嵌入式，前者適合車庫門，后者多用于商鋪。控制盒通常支持433MHz或315MHz無線頻率，兼容多達8-20個遙控器。 對碼原理基于“學習模式”：控制盒進入臨時接收狀態，學習遙控器的編碼信號（固定碼或滾動碼），從而建立綁定關系。固定碼簡單但易被復制，滾動碼更，每按鍵后碼值自動變化。

　　The rolling shutter door control box is the "brain" of the entire system, responsible for receiving remote control signals, executing lifting instructions, and integrating limit switches, motor drives, and other modules. Common types include wall mounted and embedded, with the former suitable for garage doors and the latter mostly used for shops. The control box typically supports 433MHz or 315MHz wireless frequencies and is compatible with up to 8-20 remote controls. The principle of coding is based on the "learning mode": the control box enters a temporary receiving state, learns the encoding signal (fixed code or rolling code) of the remote control, and establishes a binding relationship. Fixed codes are simple but easy to copy, while scrolling codes are more secure, with the code value automatically changing after each button press.

　　為什么需要對碼？新遙控器出廠默認無綁定；舊遙控丟失需重新配對；系統升級后可能需清碼重配。忽略對碼，門體會“失聯”，無法響應。2025年，隨著物聯網普及，許多控制盒支持APP對碼，簡化了操作。 了解這些基礎，能讓我們在實際操作中游刃有余，避免盲目試錯。

　　Why do we need a code? The new remote control has no binding by default when it leaves the factory; The old remote control is lost and needs to be re paired; After the system upgrade, it may be necessary to clear the code and reconfigure. Ignoring the code will cause the door to "go missing" and unable to respond. In 2025, with the popularization of the Internet of Things, many control boxes will support APP code matching, simplifying operations. Understanding these basics can enable us to handle practical operations with ease and avoid blind trial and error.

　　二、準備工作與注意事項

　　2、 Preparation work and safety precautions

　　對碼前，準備齊全工具是關鍵。必備物品包括：螺絲刀（平頭或十字）、備用電池（CR2032或AAA堿性電池）、說明書、多功能測試筆。建議在白天操作，確保光線充足；若控制盒位于高處，使用梯子并有人協助。

　　Preparing all necessary tools before coding is crucial. Essential items include: screwdriver (flat or cross), spare battery (CR2032 or AAA alkaline battery), instruction manual, and multifunctional testing pen. It is recommended to operate during the day to ensure sufficient lighting; If the control box is located at a high place, use a ladder and have someone assist.

　　? ：斷開電源，避免觸電。檢查門體無異物卡阻，電機無過熱跡象。兒童和寵物遠離現場。環境因素也需考慮：雨天或強磁場下信號易干擾，宜選晴朗室內操作。

　　Safety first: Disconnect the power supply to avoid electric shock. Check that there are no foreign objects blocking the door and that the motor shows no signs of overheating. Children and pets should stay away from the scene. Environmental factors also need to be considered: signals are prone to interference in rainy days or strong magnetic fields, so it is advisable to operate indoors on clear days.

　　? 預算提示：若自購遙控器，選兼容原廠頻率的，20-50元；工具套裝約100元。

　　Budget reminder: If you purchase a remote control yourself, choose one that is compatible with the original factory frequency, and the price is 20-50 yuan; The professional tool set is about 100 yuan.

　　? 常見誤區：許多用戶忽略清碼，直接對碼導致沖突。清碼是舊綁定，確保“干凈”狀態。準備充分，能將對碼成功率提升95%以上。

　　Common Misconception: Many users ignore code cleaning and directly cause conflicts with the code. Code clearing is the process of clearing old bindings to ensure a 'clean' status. Fully prepared, able to increase the success rate of code matching to over 95%.

　　三、通用對碼步驟詳解

　　3、 Detailed explanation of universal code matching steps

　　大多數卷簾門控制盒采用類似流程，以下是通用方法，適用于霍曼、米蘭等主流。整個過程只需5-10分鐘。

　　Most rolling shutter door control boxes use a similar process, and the following are general methods applicable to mainstream brands such as Homan and Milan. The entire process only takes 5-10 minutes.

　　步驟1：清碼操作（舊綁定）

　　Step 1: Code clearing operation (clearing old bindings)

　　打開控制盒蓋板（通常在門機頂部或側面，用螺絲刀松開固定螺絲）。找到“學習鍵”或“清碼鍵”（多為紅色或白色小按鈕，標注“LEARN”或“CLR”）。按住清碼鍵3-5秒，直指示燈快速閃爍3次后熄滅，即清碼成功。 若無指示燈，聽蜂鳴器“滴滴”聲。

　　Open the control box cover (usually on the top or side of the door machine, loosen the fixing screws with a screwdriver). Find the "Learn Key" or "Clear Code Key" (usually a small red or white button labeled as "LEARN" or "CLR"). Press and hold the clear code button for 3-5 seconds until the indicator light flashes rapidly 3 times before turning off, indicating successful code clearing. If there is no indicator light, listen to the beep sound of the buzzer.

　　? 注意：此步會所有舊遙控，需逐一重配。

　　Attention: This step will clear all old remote controls and requires individual reconfiguration.

　　步驟2：進入學習模式

　　Step 2: Enter learning mode

　　短按學習鍵1-2秒，指示燈常亮或緩慢閃爍，表示控制盒進入對碼狀態。窗口期通常為10-30秒，超時自動退出。 同時，安裝新電池遙控器，確保信號強勁。

　　Short press the learning button for 1-2 seconds, and the indicator light will remain on or flash slowly, indicating that the control box has entered the coding state. The window period is usually 10-30 seconds, and it automatically exits upon timeout. At the same time, install a new battery to the remote control to ensure a strong signal.

　　步驟3：發送配對信號

　　Step 3: Send pairing signal

　　對準控制盒，按遙控器的“學習鍵”或任意功能鍵（如上行鍵）1秒。控制盒指示燈閃爍2次，伴隨蜂鳴，即對碼成功。

　　Aim at the control box and press the "Learn" button or any function key (such as the up button) on the remote control for 1 second. The control box indicator light flashes twice, accompanied by a beep, indicating successful code pairing.

　　? 測試：按上行/下行鍵，門體應響應。

　　Test: Press the up/down button, and the door should respond.

　　步驟4：退出與驗證

　　Step 4: Exit and Verify

　　短按學習鍵退出模式，或自然超時。重復步驟2-3配對多遙控器。驗證時，觀察門體運行順暢、無抖動。

　　Short press the learning button to exit mode, or it will naturally time out. Repeat steps 2-3 to pair multiple remote controls. During verification, observe that the door operates smoothly and without shaking.

　　此通用法覆蓋80%場景，若失敗，檢查電池電量或頻率匹配。

　　This general usage covers 80% of scenarios. If it fails, check the battery level or frequency matching.

　　四、常見專屬對碼教程

　　4、 Common Brand Exclusive Code Matching Tutorial

　　1. 霍曼控制盒對碼

　　1. Homan control box code matching

　　霍曼以德國工藝著稱，控制盒多集成An-motors電機。

　　Hohmann is known for its German craftsmanship, with control boxes that integrate An motors.

　　? 清碼：長按“PROG”鍵8秒，LED燈從綠轉紅閃爍。

　　Clear code: Press and hold the "PROG" button for 8 seconds, and the LED light will flash from green to red.

　　? 進入學習：短按PROG，燈黃亮。按遙控上鍵，燈綠閃2次成功。 適用于車庫門，支持滾動碼。

　　Enter learning: Short press PROG, the light will turn yellow. Press the up button on the remote control, and the green light flashes twice successfully. Suitable for garage doors and supports rolling codes.

　　? 用戶反饋：信號穩定，穿墻距離超20米。

　　User feedback: The signal is stable and the distance through the wall exceeds 20 meters.

　　2. 米家（小米生態）智能控制盒

　　2. Mi Home (Xiaomi Ecology) Intelligent Control Box

　　2025年熱門，APP對碼為主。打開米家APP，添加設備>掃描控制盒二維碼>綁定遙控。

　　Popular in 2025, with app code matching as the main focus. Open the Mi Home app, add devices>scan the control box QR code>bind remote control.

　　? 手動法：按控制盒“配對”鍵，APP提示按遙控鍵同步。

　　Manual method: Press the "Pair" button on the control box, and the APP prompts to synchronize by pressing the remote control button.

　　? 優勢：語音控制，兼容小愛同學。

　　Advantages: Voice control, compatible with Xiao Ai classmates.

　　? 缺點：需穩定WiFi。

　　Disadvantage: Requires stable WiFi.

　　3. 中天（Zhongtian）800N系列

　　3. Zhongtian 800N series

　　商用。長按P鍵5-6秒，7號燈閃亮進入模式。

　　Commercial preferred. Press and hold the P key for 5-6 seconds, and the 7th light will flash to enter mode.

　　? 消碼：按3鍵3秒，燈滅；

　　Code cancellation: Press the 3 key for 3 seconds to turn off the light;

　　? 對碼：按遙控鍵，燈閃確認。

　　Code matching: Press the remote control button, the light flashes to confirm.

　　? 支持博達兼容，親民（控制盒約300元）。

　　Support Boda compatibility and affordable price (control box about 300 yuan).

　　4. SCVE管狀電機控制器

　　4. SCVE tubular motor controller

　　抖音爆款，RV22款常見。

　　The RV22 model is popular.

　　? 清碼：遙控開/關鍵同按燈閃；

　　Clear code: Press the remote control on/off button until the light flashes;

　　? 對碼：學習鍵短按后，按遙控對應鍵燈閃成功。

　　Code pairing: After short pressing the learning key, press the corresponding remote control key and the light will flash successfully.

　　? 適用于防火卷簾，集成遇阻模塊。

　　Suitable for fireproof rolling shutters, integrated with obstruction module.

　　5. 其他如森富、安麟

　　5. Other brands such as Senfu and Anlin

　　? 森富：按白色對碼鍵，配地鉤鎖/遙控。

　　Senfu: Press the white code key to match the ground hook lock/remote control.

　　? 安麟防火款：撥碼開關設置延時模式后測試。

　　Anlin Fireproof Model: Test after setting the delay mode of the dip switch.

　　? 建議查閱原廠PDF說明，下載鏈接多在官網。

　　It is recommended to refer to the original factory PDF instructions, and download links are mostly on the official website.

　　掌握差異，能針對性操作，提升效率。

　　Mastering brand differences, being able to operate targetedly, and improving efficiency.

　　五、故障排除與常見問題解答

　　5、 Troubleshooting and Frequently Asked Questions

　　對碼失敗率約10%，多因信號干擾或硬件老化。

　　The code failure rate is about 10%, mostly due to signal interference or hardware aging.

　　Q1：指示燈不亮？

　　Q1: Is the indicator light not on?

　　A：檢查電源（220V穩定），或控制盒保險絲燒斷。更換后重試。

　　A: Check the power supply (220V stable), or the fuse in the control box is blown. Replace and retry.

　　Q2：清碼無效？

　　Q2: Invalid code clearing?

　　A：長按鍵超5秒，或用拷貝遙控清：開/關鍵同按2秒燈閃。

　　A: Press the long button for more than 5 seconds, or use the copy remote control to clear: press the on/off button for 2 seconds and the light will flash.

　　Q3：門體響應慢或抖動？

　　Q3: Is the door response slow or shaking?

　　A：限位未調。手動轉動電機軸門中位，按學習鍵校準。 或電池弱，換新。

　　A: The limit has not been adjusted. Manually rotate the motor shaft to the center position of the door and calibrate by pressing the learning button. Or if the battery is weak, replace it with a new one.

　　Q4：多遙控沖突？

　　Q4: Multiple remote control conflicts?

　　A：逐一清碼重配，避免同時按鍵。

　　A: Clear and reconfigure the codes one by one to avoid pressing keys simultaneously.

　　Q5：APP對碼失敗？

　　Q5: APP code matching failed?

　　A：重啟路由，確認藍牙開啟。米家用戶更新固件。

　　A: Restart the router and confirm that Bluetooth is turned on. Mi Home users update firmware.

　　提示：若反復失敗，聯系廠家售后。定期維護，每半年檢查一次，延長壽命5年。

　　Professional tip: If repeated failures occur, contact the manufacturer's after-sales service. Regular maintenance, check every six months, extend lifespan by 5 years.

　　卷簾門控制盒對碼看似小事，卻關乎日常便利與。通過通用步驟和教程，大家已掌握核心方法。記住：操作前，失敗時多查說明。行動起來，讓卷簾門“智能升級”，享受科技帶來的從容生活！

　　The coding of the rolling shutter door control box may seem like a small matter, but it is related to daily convenience and safety. Through the general steps and brand tutorials, everyone has mastered the core methods. Remember: Safety comes first before operation, and check the instructions for any failures. Take action to upgrade the intelligence of rolling shutter doors and enjoy the relaxed life brought by technology!

　　本文由  濟南卷簾門 友情奉獻.更多有關的知識請點擊  http://www.hirxiwp.cn/   真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Jinan Rolling Shutter Doors For more related knowledge, please click http://www.hirxiwp.cn/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.